Features:
● Removal of impurities in refined aluminum solution.
● This machine is used for refining aluminum melt.
● The slag remover is placed on an electric forklift, which is easy to move.
● The high-pressure gas stored in the refining gas cylinder is decompressed and sent to the bottom of the furnace through the central hole of the graphite rotor, and is rotated and stirred by the cross graphite impeller to remove impurities in the aluminum liquid.
●The gas flow is controlled by a precision rotameter and detected by a flow sensor. The high-speed rotation speed of the impeller (during slag removal), the low-speed rotation speed of the impeller (during descending) and the slag removal time are set by the touch screen.
Parameter:
Item |
Unit |
|
power supply |
V |
AC 3-phase,
380V |
Use gas
pressure |
MPa |
0.4~0.6MPa |
Impeller speed |
rpm |
60~300rpm(stepless speed regulation) |
Slag removal
time setting |
min |
1~30min |
Gas flow
setting |
L/min |
0~25L/min |
Slagging
graphite rod interface thread |
– |
M62X4 |